دراسة مقارنة لثلاث انواع من آلات اللحام الافتراضي في معهد التدريب النفطي بيجي
DOI:
https://doi.org/10.52716/jprs.v15i2.956الكلمات المفتاحية:
Virtual reality, Virtual welding, SMAW, E6013, E6013, E7018, OTIB.الملخص
يهدف هذا البحث إلى دراسة لحام القوس بالواقع الافتراضي باستخدام لحام القوس المعدني المغطى ومقارنة ثلاثة أنواع مختلفة من أسلاك اللحام على التوالي. تتضمن طريقة العمل اختبار ثلاثة أنواع من اللحام. الطريقة هي سماو ولكن هناك اختلافات في سلك اللحام. أشارت نتائج البحث إلى وجود تباين في نتائج اللحام واختلاف واضح بين المختبرين من حيث التعرج وملء حقل اللحام. ولذلك فإن أعلى درجة تم تحقيقها وهي 51 من نوع السلك 6013 والتي تم الوصول إليها في الموضع 80 وطول القوس 49 وزاوية العمل 27 وزاوية السفر 42 وسرعة السير 60. وستساهم النتائج في زيادة قدرة المختبرين على الحصول على نتائج مستقبلية أفضل من خلال معرفتهم بالأخطاء التي حدثت.
المراجع
H. Y. Salih, O. A. Habeeb, S. E. M. Saber, and A. A. Jasem, "Clean char solid carbon fuel production via microwave processes of oily sludge produced at North Refineries Company Baiji", AIP Conference Proceedings, vol. 2862, no. 1, p. 020058, 2023, https://doi.org/10.1063/5.0172519
J. I. Humadi, A. A. Aabid, A. E. Mohammed, G. S. Ahmed, and M. A. Abdulqader, "New Design of Eco-Friendly Catalytic Electro-Photo Desulfurization process for Real Diesel Fuel", Chemical Engineering Research and Design, vol. 206, pp. 285–301, 2024, https://doi.org/10.1016/j.cherd.2024.05.001
K. A. Rahangmetan, C. W. Wullur, and F. Sariman, "Effect Variations and Types of SMAW Welding Electrodes on A36 Steel to Tensile Test", Journal of Physics: Conference Series, vol. 1569, no. 3, p. 032052, 2020. https://doi.org/10.1088/1742-6596/1569/3/032052.
D. F. Silva and P. P. Brito, "Electrochemical Behavior of Dissimilar Carbon-Stainless Steel RSW Joints", Welding Journal, vol. 99, no. 1, pp. 1–7, 2020. https://doi.org/10.29391/2020.99.001.
C. Tippayasam and A. Kaewvilai, "Steel Reinforced Polyethylene Pipe: Extrusion Welding, Investigation and Mechanical Testing", Welding Journal, vol. 99, pp. 52s–58s, 2020. https://doi.org/10.29391/2020.99.005.
N.-H. Tran, V.-N. Nguyen, and V.-H. Bui, "Development of a Virtual Reality-Based System for Simulating Welding Processes", Applied Sciences, vol. 13, no. 10, p. 6082, 2023, https://doi.org/10.3390/app13106082.
U. Reisgen, M. Schleser, O. Mokrov, and A. Zabirov, "Virtual welding equipment for simulation of GMAW processes with integration of power source regulation", Frontiers of Materials Science, vol. 5, pp. 79–89, 2011, https://doi.org/10.1007/s11706-011-0132-6.
S. J. Chen, Y. Z. Jia, J. Xiao, and W. H. Huang, "Laser-driven programmable metal transfer in GMAW", Welding Journal, vol. 99, pp. 93–100, 2020. https://doi.org/10.2939/2020.99.009.
M. Jiang, Y. B. Chen, X. Chen, W. Tao, and T. Debroy, "Enhanced penetration depth during reduced pressure keyhole-mode laser welding", Welding Journal, vol. 99, pp. 110–124, 2020. https://doi.org/10.2939/2020.99.011.
X. Wu, Z. Wang, J. R. Bunn, L. Kolbus, Z. Feng, Z. Yu, and S. Liu., "Control of Weld Residual Stress in a Thin Steel Plate through Low Transformation Temperature Welding Consumables", Welding Journal, vol. 99, no. 4, 2020. https://doi.org/10.29391/2020.99.012
X. Han, M. H. Razmpoosh, A. Macwan, E. Biro, and Y. Zhou, "Effect of galvannealed coating evolution during press hardening on RSW weldability," Welding Journal, vol. 99, pp. 156–162, 2020. https://doi.org/10.2939/2020.99.011.
A. S. Magalhaes et al., "Effect of PWHT on laser-welded duplex stainless steel," Welding Journal, vol. 99, no. 7, pp. 185s–202s, 2020. https://doi.org/10.2939/2020.99.018.
R. Kannan, L. Li, L. Guo, and N. Anderson, "Bond Formation Mechanism for Resistance Welding of X70 Pipeline Steel," Welding Journal, vol. 99, pp. 209s–223s, 2020, https://doi.org/10.2939/2020.99.020.
S. Hu, A. S. Haselhuhn, Y. Ma, Y. Li, B. E. Carlson, and Z. Lin, "Comparison of the resistance spot weldability of AA5754 and AA6022 aluminum to steels," Welding Journal, vol. 99, no. 8, pp. 224s–238s, 2020. https://doi.org/10.2939/2020.99.021.
UVCOFARC WELDING, "Article Info Abstract Original Research Article”.
S. Zou, Z. Wang, S. Hu, G. Zhao, W. Wang, and Y. Chen, "Effects of filler wire intervention on gas tungsten arc: Part I—mechanism", Welding Journal, vol. 99, pp. 246s–254s, 2020. https://doi.org/10.2939/2020.99.023.
A. E. Mohammed, S. A. Gheni, W. T. Mohammed, M. A. Abdulqader, and O. A. Habeeb, “Converting Iraqi Hazardous Crude Oily Sludge into Value-Added Activated Carbon using KOH Activation Technique”, Journal of Petroleum Research and Studies, vol. 14, no. 1, pp. 154-175, Mar. 2024. https://doi.org/ 10.52716/jprs.v14i1.773.
M. A. Abdulqader, A. E. Mohammed, Sfoog H. Saleh, H. M. S. Al-Jubouri, O. A. Habeeb, and S. H. Abdulmalek, "Total remediation of North Refineries Company oily sludge using hydrothermal carbonization for hydrochar production”, In International Conference on Engineering, Science and Advanced Technology (ICESAT), Mosul, Iraq, pp. 230-235, 2023. https://doi.org/10.1109/ICESAT58213.2023.10347311
C. Favi, F. Campi, and M. Germani, "Comparative life cycle assessment of metal arc welding technologies by using engineering design documentation", International Journal of Life Cycle Assessment, vol. 24, pp. 2140–2172, 2019. https://doi.org/10.1007/s11367-019-01621-x
B. M. Ali, M. I. Salih, M. A. Abdulqader, B. Bakthavatchalam, and O. A. Hussein, "Dehydration and decarboxylation via pyrolysis process of waste oily sludge accumulated at North Refineries Company Baiji for use as a pyro-fuel", Desalination and Water Treatment, vol. 318, p. 100330, 2024. https://doi.org/10.1016/j.dwt.2024.100330.
Y. Nusbir and A. Sianipar, "Experimental effect of angle variation and speed welding filler using vertical adaptive sliding system in SMAW welding", Journal of Ocean, Mechanical and Aerospace Science Engineering, vol. 59, no. 1, pp. 1–5, 2018. http://dx.doi.org/10.36842/jomase.v59i1.13
J. Jasman, I. Irzal, and P. Pebrian, "Effect of strong welding flow on the violence of low carbon steel results of SMAW welding with electrodes 7018", Teknomekanik, vol. 1, no. 1, pp. 24–31, 2018.
F. Khamouli, M. Zidani, K. Digheche, A. Saoudi, and L. Atoui, "Effect of E6010 and E8018-G fluxes utilization on SMAW multi-pass welded steel", in Diffusion Foundations, Trans Tech Publications, pp. 55–64, 2018. https://doi.org/10.4028/www.scientific.net/DF.18.55.
A. Reghioua, M. A. Abdulqader, and A. Khaoula, "The exploitation of the Peanut Shells wastes and converting into sustainable materials as low cost adsorbent that contributes to water pollutant sequestration", in Book of Abstracts of the First International Seminar on Catalysis, Chemical Engineering & Green Chemistry (CaCEG-2023), p. 64, 2022.
M. I. Fathi, M. A. Abdulqader, and O. A. Habeeb, "Microwave process of oily sludge produced at NRC Baiji to micro-char solid carbon production", Desalination and Water Treatment, vol. 310, pp. 142–149, 2023. https://doi.org/10.5004/dwt.2023.29935.
O. D. Nata, M. Hidayat, and S. A. Rohman, "Analisis Kekuatan Uji Bending Pengelasan Shielded Metal Arc Welding (SMAW) Material SS400 Menggunakan Kawat Las E6013 Berbagai Variasi Arus Listrik", Hexagon: Jurnal Teknik dan Sains, vol. 2, no. 1, pp. 12–15, 2021. https://doi.org/10.36761/hexagon.v2i1.871
التنزيلات
منشور
كيفية الاقتباس
إصدار
القسم
الرخصة
الحقوق الفكرية (c) 2025 Mohammed H. Abbas, Mohammed A. Mhaimed, Mahmod. A. Abdulqader, Omar A. Habeeb
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
