تحضير وتوصيف محفز اوكسيد المولبدينيوم المحمل على اوكسيد التيتانيوم لعملية ازمرة الهكسان الطبيعي

G. Busca, “Acid catalysts in industrial hydrocarbon chemistry,” Chemical Reviews, vol. 107, no. 11, pp. 5366–5410, 2012, doi: https://doi.org/10.1021/cr068042e.

A. Dhar, R. L. Vekariya, and P. Bhadja, “n-Alkane isomerization by catalysis—a method of industrial importance: An overview,” Cogent Chemistry, vol. 4, no. 1, Art. no. 1514686, 2018, doi: https://doi.org/10.1080/23312009.2018.1514686.

F. M. Elfghi, " Catalytic Naphtha Reforming; Challenges for Selective Gasoline; an Overview and Optimization Case Study,” Journal of Advanced Catalysis Science and Technology, vol. 3, pp. 27-42, 2016, doi: http://dx.doi.org/10.15379/2408-9834.2016.03.01.04.

M. F. Mohamed, W. M. Shehata, A. A. Abdel Halim, and F. K. Gad, "Improving gasoline quality produced from MIDOR light naphtha isomerization unit," Egyptian Journal of Petroleum, vol. 26, no. 1, pp. 111-124, 2017, doi: https://doi.org/10.1016/j.ejpe.2016.02.009.

S. A. Kamel, W. T. Mohammed, and H. Aljendeel, "Synthesis and Characterization of Ni-WO3/Sulfated Zirconia Nanocatalyst for Isomerization of N-Hexane and Iraqi Light Naphtha," Iraqi Journal of Chemical and Petroleum Engineering, vol. 22, no. 4, pp. 1–10, 2021, doi: https://doi.org/10.31699/IJCPE.2021.4.1.

A. A. K. Mohammed, M. Gaib, and M. N. Abbass,"Effect of Promoters on the Catalytic Activity of the Isomerization Catalyst", Iraqi Journal of Chemical and Petroleum Engineering, vol. 9, no. 1, pp. 9–14, 2008, doi: https://doi.org/10.31699/IJCPE.2008.1.2.

A. A. K. Mohammed, M. Al-Hassani, and S. Kareem, "The Effect of TCE Addition on the Performance of Catalytic Isomerization of n-Hexane," Iraqi Journal of Chemical and Petroleum Engineering, vol. 9, no. 4, pp. 7–12, 2008, doi: https://doi.org/10.31699/IJCPE.2008.4.2.

Z. Adzamic, T. Adzamic, M. Muzic, and K. Sertic-Bionda, "Optimization of the n-hexane isomerization process using response surface methodology," Chemical Engineering Research and Design, vol. 91, no. 1, pp. 100–105, 2013m doi: http://dx.doi.org/10.1016/j.cherd.2012.06.012.

A. T. Jarullah, A. M. Ahmed, H. M. Hussein, A. N. Ahmed, and H. J. Mohammed, “Evaluation of Synthesized Pt/HY-H-Mordenite Composite Catalyst for Isomerization of Light Naphtha,” Tikrit Journal of Engineering Sciences, vol. 30, no. 1, pp. 94–103, 2023, doi: https://doi.org/10.25130/tjes.30.1.9.

D. J. Ahmed, B. I. Al-Abdaly, and S. J. Hussein, "Synthesis and Characterization of New nano catalyst Mo-Ni /TiO2- γAl2O3 for Hydrodesulphurization of Iraqi Gas Oil," Baghdad Science Journal, vol. 18, no. 4(Suppl.), pp. 1557-1567, 2021, doi: https://doi.org/10.21123/bsj.2021.18.4(Suppl.).1557.

H. Al-Kandari, F. Al-Khorafi, H. Belatel, and A. Katrib, "The bifunctional catalytic properties of partially H2-reduced MoO3," Catalysis Communications, vol. 5, no. 5, pp. 225-229, 2004, doi: https://doi.org/10.1016/j.catcom.2004.02.008.

E. Gutierrez-Acebo, C. Leroux, C. Chizallet, Y. Schuurman, and C. Bouchy, “Metal/acid bifunctional catalysis and intimacy criterion for ethylcyclohexane hydroconversion: when proximity does not matter,” ACS Catalysis, vol. 8, no. 7, pp. 6035-6046, 2018, doi: https://doi.org/10.1021/acscatal.8b00633.

W. M. Shehata, M. F. Mohamed, and F. K. Gad, "Monitoring and modeling of variables affecting isomerate octane number produced from an industrial isomerization process," Egyptian Journal of Petroleum, vol. 27, no. 4, pp. 945–953, 2018, doi: http://dx.doi.org/10.1016/j.ejpe.2018.02.006.

A. Kharat, A. Mohammadrezaee, and M. Aliahmadi, " Deactivation of platinum on chlorinated alumina catalyst in the light naphtha isomerization process," Reaction Kinetics, Mechanisms and Catalysis, vol. 133, no. 1, pp. 327–339, 2021, doi: https://doi.org/10.1007/s11144-021-01978-x.

H. Al-Kandari, F. Al-Kharafi, and A. Katrib, " Isomerization reactions of n-hexane on partially reduced MoO3/TiO2," Catalysis Communications, vol. 9, no. 5, pp. 847–852, 2008, doi: https://doi.org/10.1016/j.catcom.2007.09.009.

J. Al-Fadhli, M. Al-Salman, R. Bouresli, F. Al-Tarkait, and F. Jassem, “MoO3/TiO2 Hydroisomerization Performance Using n-hexane in Comparison with a Platinum Commercial Catalyst; Pilot Scale,” Journal of Applied Sciences, vol. 20, no. 5, pp. 182–190, 2020, doi: http://dx.doi.org/10.3923/jas.2020.182.190.

A. Benadda, A. Katrib, and A. Barama, "Hydroisomerization of n-heptane and dehydration of 2-propanol on MoO2(Hx)ac. Catalysts," Applied Catalysis A: General, vol. 251, no. 1, pp. 93-105, 2003, doi: https://doi.org/10.1016/S0926-860X(03)00316-8.

H. Al-Kandari, A.M. Mohamed, F. Al-Kharafi and A. Katrib, "Effect of Pt addition on the isomerization properties of MoO2!x(OH)y deposited on TiO2," Catalysis Communications, vol. 12, no. 13, pp. 1188-1192, 2011, doi: https://doi.org/10.1016/j.catcom.2011.04.006.

D. J. Ahmed, B. I. Al-abdaly, and S. J. Hussein, “Synthesis and Characterization of High Surface Area Nano Titanium Dioxide,” Journal of Petroleum Research and Studies, vol. 11, no. 4, pp. 51-75, Dec. 2021, doi: https://doi.org/10.52716/jprs.v11i4.563.

S. Bagheri, K. Shameli, and S. B. Abd Hamid, "Synthesis and characterization of anatase titanium dioxide nanoparticles using egg white solution via Sol-Gel method," Journal of Chemistry, Art. no. 848205, 2013. https://doi.org/10.1155/2013/848205.

A. Kubiak, W. Wojciechowska, B. Kurc, M. Pigłowska, K. Synoradzki, E. Gabała, D. Moszyński, M. Szybowicz, K. Siwińska-Ciesielczyk, and T. Jesionowski, "Highly Crystalline TiO2-MoO3 Composite Materials Synthesized via a Template-Assisted Microwave Method for Electrochemical Application," Crystals, vol. 10, no. 6, Art. no. 493, 2020, doi: https://doi.org/10.3390/cryst10060493.

D. J. Ahmed, and B. I. Al-abdaly, "Effect of SiO2 Addition and Calcination Temperature on Surface Area, Crystal Size, particle size, and Phase Transformation of TiO2 Prepared by Sol-Gel Method," Solid State Technology, vol. 64, no. 2, 2021.

L. Du, Y. Han, Y. Zhu, Y. Xu, X. Bai, Y. Ouyang, Y. Luo, and X. Shu, "Reaction Pathway of 1-Decene Cracking to Produce Light Olefins over H-ZSM-5 at Ultrahigh Temperature," ACS Omega, vol. 8, no. 7, pp. 7093–7101, 2023, doi: https://pubs.acs.org/doi/10.1021/acsomega.2c08012.

H. A. Aljandeel, and H. Q. Hussein, " Kinetic Study of Hydroisomerization of n-Decane using Pt/SAPO-11 catalysts," Iraqi Journal of Chemical and Petroleum Engineering, vol. 19, no. 3, pp. 11–17, 2018, doi: https://doi.org/10.31699/ijcpe.2018.3.2.

R. E. Emberru, R. Patel, I. M. Mujtaba, and Y. M. John, " A Review of Catalyst Modification and Process Factors in the Production of Light Olefins from Direct Crude Oil Catalytic Cracking," Sci, vol. 6, no. 1, Art. no. 11, 2024, doi: https://doi.org/10.3390/sci6010011.

H. Yang, R. Coolman, P. Karanjkar, H. Wang, P. Dornath, H. Chen, W. Fan, W. C. Conner, T. J. Mountziaris, and G. Huber, "The effects of contact time and coking on the catalytic fast pyrolysis of cellulose," Green Chemistry, vol. 19, no. 1, pp. 286–297, 2017, doi: https://doi.org/10.1039/C6GC02239A.

K. Barkalov, I. Gubaydullin, E. Kozinov, I. Lebedev, R. Faskhutdinova, A. Faskhutdinov, and L. Enikeeva, "On Solving the Problem of Finding Kinetic Parameters of Catalytic Isomerization of the Pentane-Hexane Fraction Using a Parallel Global Search Algorithm," Mathematics, vol. 10, no. 19, Art. no. 3665, 2022, doi: https://doi.org/10.3390/math10193665.